RIEJU MRX-SMX 50 Manual De Taller Chasis página 79

Engine Rieju
11) DISENGAGE the nut from its fixing tab (1/F-9); using the appropriate wrench
(1/F-10), unscrew and remove the fixing nut (2/F-10) of the clutch boss.
12) REMOVE the following pieces in this order: clutch boss (1/F-11), spacer (2/F-11), clutch
gear (3/F-11), shim washer (1/F-12), tapered washer (2/F-12), paying attention to the direc-
tion in which they are assembled so as to reassemble them correctly afterwards.
13) USING the magneto flywheel locking wrench (1/F-13), lock the flywheel and slacken
the retaining nut of the gear on the countershaft with the wrench (1/F-14).
14) REMOVE the gear on the countershaft (1/F-14) and the key.
F-9
F-11
F-13
Engine
F-10
F-12
F-14
17