HumanTechnik shake awake Instrucciones De Servicio página 8

5. Altering the clock display
You can use the set switch in the battery compartment to switch the clock
display between 12-h and 24-h format. To alter the time format, proceed as
follows:
• Remove the battery compartment cover.
• Remove the batteries from the battery compartment.
• Slide the set switch to the desired time format and insert the batteries back
into the battery compartment.
• Replace the battery compartment cover.
Connection options
The following special accessories can be connected to the shake awake's
3.5 mm cinch jack:
• Vibration pillow
• Flash module
• Switch module
• Acoustic module
Before the wake-up alarm can be emitted via a device connected to the cinch
jack, the left switch has to be set to for the audible alarm.
Maintenance and care
The shake awake does not require any maintenance. If the unit does become
dirty, simply wipe it clean with a soft, damp cloth. Never use spirits, thinners
or other organic solvents. Do not set up the unit where it will be exposed to
full sunlight for long periods. In addition it must be protected against excessive
heat, moisture and severe mechanical shock.
8 English