How To Operate - Panasonic CS-V28BKP5 Manual Del Usuario

How to Operate

Auto Restart Control.
I
If there is a power failure, operation will be
automatically restarted after 3 minutes when the
power is resumed with previous operation mode
and airflow direction.
(When the operation is not stopped by remote
control.)
I
If you do not intend to continue the operation
when the power is resumed, pull out the power
plug at main unit or power supply.
When you insert the power plug the operation
will be automatically restarted with previous
operation mode and airflow direction.
Note: 1. If you do not require Auto Restart
Control, please consult your dealer.
2. Auto Restart Control is not available
when Timer or Sleep Mode is set.
Recommended temperature for health
and comfort.
For Cooling : 26°C
For Soft Dry : 1°C
room temperature.
<Operation Details>
AUTO – Automatic Operation.
I
Once the Automatic Operation is selected, the in-
door temperature sensor operates automatically
to select the desired operation mode with Cooling
or Soft Dry.
Temperature
COOLING
23°C
SOFT DRY
9
– 28°C
– 02°C lower than
Temp. set at
25°C
Temp. set at
22°C
DRY – Soft Dry Operation.
I
Soft Dry is a very gentle Cooling Operation
consisting primarily of dehumidifying. It does not
lower the room temperature very much.
Cooling operation
until room tempera-
ture reaches the set-
ting temperature
Setting
Temperature
When room temperature reaches the setting temperature,
operation will switch to Soft Dry.
Operation will be switched
on and off for up to
10 min on and 6 min off
during Soft Dry
Super Low air-
flow amount