Robern M Serie Instrucciones De Instalación página 4

Figure D
This figure gives an overall pic-
ture for all types of installations.
CABINET
FRONT
PRE-DRILLED HOLES FOR
CABINET-TO-CABINET
OR CABINET-TO-SIDE KIT
CONNECTIONS
On HINGE side:
Use #10 Flat Head SMS/wood screw
(1/2") [12.7 mm]
On NON-HINGE side:
Use #10 Flat Head SMS/wood screw
(1/2") [12.7 mm]
DOOR
PRE-DRILLED HOLES FOR
CABINET-TO-CABINET
OR CABINET-TO-SIDE KIT
CONNECTIONS
On HINGE side:
Use #10 Pan Head SMS/wood screw
(1/2") [12.7 mm] and cap
On NON-HINGE side:
Use #10 Flat Head SMS/wood screw
(1/2") [12.7 mm]
PAN HEAD SMS/WOOD SCREW
FLAT HEAD SMS/WOOD SCREW
209-1095 M Series Cabinet with Cold Storage 9/15/09
TOP OF CABINET
HINGE
INSIDE OF CABINET
MOUNT/UNMOUNT
HINGE HERE
HINGE
BOTTOM OF CABINET
4"
(101.6 mm)
WALL LOCATION
(SEMI-RECESSED MOUNT)

ENGLISH
1 3/4"
(44.45 mm)
MOUNTING BAR FOR
SURFACE MOUNT
3 3/4"
(92.25 mm)
WALL LOCATION
(SURFACE MOUNT)
TOP "Z" CLIP
FOR SURFACE
MOUNT (3 PER
CABINET)
CENTERLINE
FOR ELECTRICAL
CONNECTIONS (ON
BACK OF CABINET)
PRE-DRILLED HOLE
FOR SEMI-RECESSED
CABINET
INSTALLATION ONLY
On HINGE side:
Use #10 Pan Head
SMS/wood screw
(2" or 3") [50.8mm or
76.2mm] and cap
On NON-HINGE side :
Use #10 Flat Head
SMS/wood screw
(2" or 3") [50.8mm or
76.2mm]