General Notes - Robern M Serie Instrucciones De Instalación

General Notes

Unpack the cabinet. Check the box thoroughly for all
hardware and loose parts as follows:
■
Cabinet (check the model number)
■
Shelves
■
"Z" Mounting Bar
■
Top Mirror Cap
■
Hardware Bag
Make sure that you have all the contents listed above
and in the Parts List on page 11.
IMPORTANT: Before starting your installation, remove
the outer door from the cabinet and store it in the
cabinet box. Do not remove the inner cold storage
unit door. Make sure that the edges of the door are
protected. Removing the door makes it easier to install
the cabinet.
Determining Dimensions
The M Series is a modular system of cabinets that can
be installed in different combinations. The overall size of
the cabinets is determined by the overall dimensions of
the assembled cabinet units. Before cutting any holes in
the wall, determine the overall
for an example (using an MT20D8FPCSL cabinet) that
shows the overall dimensions and the rough opening
dimensions.
Determining Width:
1. Determine the front width of the cabinet model(s):
The M Series cold storage cabinets are = 19 1/4"
(488.95 mm) wide
2. If you are combining cabinets, add widths for each
cabinet to determine overall width.
3. Subtract ¾" (19.1 mm) from the total width to
determine the horizontal width of the rough
opening.
Determining Height:
1. Determine the front height of the cabinet model(s):
The M Series cold storage cabinets are = 30" (762
mm) high
2. Subtract ¾" (9. mm) from the height to deter-
mine the vertical height of the rough opening.
209-1095 M Series Cabinet with Cold Storage 9/15/09
dimensions. See Figure A
This cabinet must be installed in wood-studded walls.
For the doors to operate properly, the cabinets must be
installed in a square and plumb manner. Use a Square
and Level when installing cabinets.
Save these instructions for future use and reference.
An improper installation voids the warranty. Installed
cabinets cannot be returned.
If you experience any problems with your cabinet,
contact your dealer or Robern directly.
Robern • 701 N. Wilson Ave • Bristol, PA 19007
-800-877-376 •
Limited Warranty — One Year Term (see page 11)
MT20D8FPCSL
19 1/4"
(488.95 mm)
ROUGH OPENING DIMENSIONS
Height: 29 1/4" (30" - 3/4")
742.95 mm (762 mm - 19.1 mm)
Width: 18 1/2" (19 1/4"- 3/4")

ENGLISH
-5-86-9666
FAX
Figure A
30 "
(762 mm)
469.85 mm (488.95 mm - 19.1 mm)