Power Save - American Standard Advanced Clean 3.0 SpaLet Manual Del Usario

Power Save

The power save function includes the one-touch power save (8 hours) option and the advanced power save (always on)
option. Using one-touch power save together with advanced power save is even more effective at reducing energy con-
sumption. This function is turned off by default.
One-touch Power Save (8 Hours)
Press this switch when the SpaLet
SpaLet seat heater for 8 hours and reduce power consumption. The previous settings will be restored after 8 hours elapse.
● Press the [Power Save] button.
* Each pressing of the [Power Save] button toggles
between the power-saving modes.
* The Power Save indicator in the LCD turns on when
the function is enabled.
Set
8:00 10:00 12:00 14:00 16:00 18:00 20:00
Temperature
Setting
Power Save
Temperature
OFF
Power save indicator Off
(Reference)
● The one-touch power save setting would be back to default setting after power outage or when the power plug has been discon-
nected from the outlet.
Advanced Power Save (Always On)
This function lowers the water temperature when the SpaLet seat is not in use to reduce power consumption.
* Power is saved at all times while the SpaLet seat is not in use.
● Press and hold both the [Nozzle
Cleaning] and [Power Save]
buttons for at least 2 seconds.
* The power saving mode is changed each time the
[Power Save] and [Nozzle Cleaning] buttons are
both pressed and held for at least 2 seconds.
* The Power Save indicator in the LCD flashes when
the function is enabled.
Set
Temperature
Setting
Power Save
Temperature
OFF
Power save indicator Off
(Reference)
● When the power save function is activated, the water temperature is lowered, which may feel cool to the touch. In
this case, cancel the power save function.
● Leaving the seat lid closed is still an effective way to conserve power when the power save function is turned off.
®
seat will not be used for an extended period of time, such as at night, to turn off the
Restoration
10:00
8 hours Standby
On Flashes On
In use
Power Save
Restoration
Flashes twice
* The one-touch power save option
can be activated twice per day.
* Once 8 hours elapse, the previ-
ous settings are automatically
restored, and the Power Save
indicator begins to flash.
[Nozzle Cleaning] + [Power Save]
* When used in combination with
the one-touch power save option,
the Power Save indicator on the
LCD turns on while the one-touch
power save option is in effect for 8
hours. The Power Save indicator
flashes twice during the 16 hours
of one-touch power save standby.
[Power Save]
● Seat unit indicator section
Power save
indicator
● Seat unit indicator section
Power save
indicator
(flashes twice)
18 - EN