Adjust The Temperature; About Indicators - American Standard Advanced Clean 3.0 SpaLet Manual Del Usario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

STEP
4

Adjust the Temperature

● Change the temperature
* Press the corresponding switch to change the dif-
ferent temperatures.
Seat Temp.
* There are 6 levels of seat temperature available including "Off",
"Low (approximately 82.4°F)", "High (approximately (96.8°F)",
and the other levels between low and high. Select your tem-
perature preference in accordance with the season.
Water Temp.
* There are 6 levels of water temperature available including
"Off", "Low (approximately 89.6°F)", "High (approximately
104°F)", and the other levels between low and high. Select
your temperature preference in accordance with the season.
Dryer Temp.
* There are 3 levels of drying temperature available including
"Low", "Medium", and "High". (+ Page 17)
WARNING
Be sure to set the seat temperature
to the "OFF" setting when the SpaL-
®
et
seat will be used by the following
OBSERVE
types of users.
• Children
• Elderly persons
• Persons with illness
• Persons with limited mobility
• Persons with sensitive skin
• Persons who are taking medication that
causes drowsiness
• Persons who are under the influence
of alcohol
• Persons who are suffering from exhaustion
* Using the SpaLet seat for an extended
period of time without turning off the seat
heater may result in low-temperature
burns.
(Reference)
•   T he SpaLet seat does not warm immediately. The
seat heater should be turned on 10 to 15 minutes
before use to ensure the desired temperature is
reached for comfortable use.
•   T his SpaLet seat is equipped with a seat heater
auto off function that automatically turns off the seat
heater when the SpaLet seat is in use to prevent low-
temperature burns. (+ Page 19)
•   T he maximum seat temperature is 96.8°F for energy-
saving purposes. The seat may feel cool depending
on the usage environment.

About Indicators

All indicator LEDs will be off if the button is left
unoperated for several seconds. If the indicator LEDs
are off while making settings, press the button again.
10 - EN
Tabla de contenido

Solución de problemas

loading

Tabla de contenido