Roca Euret Manual Del Usuario página 7

6 Installation procedure
Make sure the connection it's correct and open the water to test the function.
After function test is completed, follow the bottom diagram to apply silicone sealer around the urinal.
7
Settings
Distance adjustment
Follow below steps to limit detection distance in reduced space enviroment.
Approach a magnet to IR
window for >10sec
NOTE: For auto adjustment, make sure no object is located in the detection range during setting timing. If you would like to manually
adjust the distance please put an object (such us white paper) in the desired distance during the setting time.
Flushing mode selection
For auto-flushing mode, you may select water-saving mode or intensive clean mode based on your preference.
When the interval between two users is more than
Pre-flush
30min
Half volume when the interval between two users is
Main flush
5min.
Deodorizer function No
Approach a magnet to IR
window between 5-10sec
• Apply silicone continuously around the top section of urinal.
• Ensure no water leakage around the AC power socket to prevent possible installa
tion failure.
ENTER INTO DISTANCE
ADJUSTMENT MODE
WATER SAVING MODE
ENTER INTO
Apply magnet
FLUSHING
MODE
LED will flash for 5 times and
IR will automatically adjust
distance
Always
Always
Flush if more than 3 users during 2 min.
WATER SAVING
MODE
LED will flash for
one time.
7
INTENSIVE CLEAN
INTENSIVE
Apply magnet
CLEAN MODE
LED will flash for
two times.
Wait 10sec
Finish setting