Replacing the broiler drawer:
1. Hold the broil drawer in the raised
position, while sliding it halfway into
the range.
2. Lower the drawer and push it until it
closes completely.
Maintenance
Oven light
WARNING:
SHOCK OR BURN HAZARD: Before replacing oven light bulb, discon-
nect the electrical power to the range at the main fuse or circuit breaker panel. Failure to
do so may result in electric shock or burn.
CAUTION:
BURN HAZARD: The glass cover and bulb should be removed when
cool. Touching hot glass with bare hands or a damp cloth can cause burns.
CAUTION:
Before replacing the oven light bulb, disconnect the electrical power to
the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb
cool completely.
The oven light bulb is covered with a removable glass cover that is held in place with a
bail-shaped wire.
Remove the oven door, if desired, to reach the cover easily. See the Lift-Off Oven Door
section for detailed oven door removal instructions.
Replacing the light bulb:
1. Disconnect electrical power to the
range.
2. Hold the glass cover stable, so it
doesn't fall when released.
3. Slide near the indent of the cover
holder until the cover is released. Do
not remove any screws to release the
glass cover.
4. Replace bulb with a 40-watt house-
hold appliance bulb. Do not touch
hot bulb with hand or wet cloth.
Only remove bulb when it is cool.
5. Hold glass cover stable over new
bulb.
6. Pull the wire cover holder near the
indent until the indent in the wire
cover holder is located in the indent
of the glass cover.
7. Connect electrical power to range.
Glass cover
Indent
Wire cover holder
81