Cleaning The Cooktop - IO Mabe IO7660 Manual De Uso Y Cuidado

Oven racks
All oven racks may be cleaned by hand with an abrasive cleaner or steel wool.
Self-clean (black) oven racks may remain in the oven during the self-clean cycle.
Nickel-plated (silver) racks should not remain in the oven during the self clean cycle.
Doing so will tarnish the racks. If either type of rack is left in the oven during a
self-clean cycle, the rack may become difficult to slide.
After cleaning the racks, use a soft cloth or paper towel to rub a small amount of
vegetable oil on the left and right edges of the rack. This will ensure the racks are
easy to slide in and out of the oven.

Cleaning the cooktop

Control panel and knobs
Wipe the control panel after each use
of the oven with a damp cloth. For
cleaning, use mild soap and water or a
50/50 solution of vinegar and water.
Rinse with clean water. Polish dry with
a soft cloth.
Do not use abrasive cleansers, strong
liquid cleansers, plastic scouring pads
or oven cleaners on the control
panel—they will damage the finish.
Stainless steel surfaces (on some
models)
Do not use a steel wool pad; it will
scratch the surface.
To clean the stainless steel surface, use
warm sudsy water or a stainless steel
cleaner or polish. Always wipe the
surface in the direction of the grain.
Follow the cleaner instructions for
cleaning the stainless steel surface.
Use only a liquid cleanser free of grit
and rub in the direction of the brush
lines with a damp, soft sponge.
For easier cleaning, the control knobs
may be removed by pulling them direct-
ly outwards once the knobs are in the
OFF position. Do not pull knobs up or
down or hang objects on them. This
can damage the gas valve shaft. The
knobs can be washed by hand with
soap and water or in a dishwasher.
To replace knobs after cleaning, align
the hole on the knob backside with the
gas valve shaft and push inward until
the knob is securely fastened. All knobs
are interchangeable.
Surface burner knob
75