Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Reminders
•
Stopping a dispensing cycle by opening
the basket holder or pressing the I/
button will cause the scoop number to
flash. This means that a new dispense
cycle will begin once the unit is
restarted. Empty the dispensed coffee
grounds to avoid having too much in the
basket holder, and start process from
the beginning.
•
When the SMART brew basket is not
in place or not closed all the way and a
cycle is started, the message "nO bAS"
is displayed. This message is removed
when the SMART brew basket is
detected.
•
If there is no water in the reservoir, the
message "FIL H2O" is displayed. Once
water is added and the cycle is restarted,
the message disappears, coffee grounds
dispensing is bypassed, and brewing
begins.
•
If the basket holder is not opened after
the last brew (to clean out old grounds),
the message "bAS Err" is displayed.
Once the basket holder is opened, the
message is removed.
•
If the grounds container is not in place
and scoop number is set to anything but
0 and a cycle is started, the unit shuts off.
•
When programming the Auto On time,
the clock display shows "START TIME."
Once this time is set, this message is
turned off.
sec
•
When the program mode is enabled,
a white LED is illuminated above the
PROG button.
sec
sec
11
Tabla de contenido
