Connecting To An External Av Device (Av Output); Connecting To Pc - Odys MultiFlat 20 DVD Manual Del Usuario

4.6 Connecting to an External AV device (AV output)

Use the AV cable to connect the external AV device to the AV output connections on the rear side of
the unit.
After you have done this, turn on the unit and the external AV device and then press the SOURCE
button to change to the corresponding mode.
Please note that this function is ONLY available in TV Mode!

4.7 Connecting to PC

The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to
connect:
1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and connect
the other end to the PC.
2. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit and
connect the other end to the PC audio output jack.
3. Set the screen resolution on your PC to 800x600 @ 60 Hz.
After connection, turn on the unit and the PC, press the SOURCE button to shift to VGA mode.
ODYS MultiFlat 20" DVD
17