Odys MultiFlat 20 DVD Manual Del Usuario página 72

ODYS MultiFlat 20" DVD
Auto Scan
Press the ▲▼ button to select the Auto Scan, press the ENTER button to start auto scan.
The screen will display as shown on the right:
Auto scan will take a few minutes. When the tuning
operation completes the unit will exit and memorize the
programs by sequence automatically.
During tuning, press the MENU button to exit the auto
scan mode.
Prog Organizer
Press the ▲▼ button to select the
Prog Organizer and press the
ENTER button to enter the menu as
shown on the right. Press the ▲▼
button to select the desired items.
Press the MENU button to return to
the previous menu, press the EXIT
button to exit the setup menu.
Channel Name
Press the ▲▼ button to select the Channel Name and press the ENTER button to enter the setup.
Press the ▲▼ button to select character or press the number button to input number, press the
ENTER button to confirm input. Press the MENU or EXIT button to exit.
Skip
Press the ▲▼ button to select the Skip. Press the ENTER button to enter the set the item on or off.
When the skip function is activated, the channel is skipped. Press the MENU button to return to the
previous menu.
Swap From Ch
Press the ▲▼ button to select the Swap From Ch, press the ENTER button to enter the setup. Enter
the channel number you want to swap using the number buttons and then press the ENTER button.
Swap To Ch
Press the ▲▼ button to select the Swap To Ch, press the ENTER button to enter the setup. Enter the
channel number that you want to be swapped with the sender number above using the number
buttons and press ENTER to confirm.
Perform Swap
Press the ▲▼ button to select the Perform Swap. Use the ENTER button to confirm your entries and
swap channels.
25