Audio Setup Page - Odys MultiFlat 20 DVD Manual Del Usuario

ODYS MultiFlat 20" DVD

8.2 Audio Setup Page

Press the SETUP button in DVD mode. Use ◄ ► to select
the Audio Setup menu. The Audio Setup menu will appear:
Select the desired submenu using the direction buttons ▲▼
on the remote and press ENTER to confirm. Select an
option value to be set using the ▲▼ direction buttons on the
remote and press ENTER to confirm, or press ◄ to cancel
setting. After ENTER; you return to the main menu using ◄.
Dolby Digital Setup:
Dual Mono
This function is used to set audio output.
Stereo: Stereo signal output
L-Mono: Left audio channel signal output
R-Mono: Right audio channel signal output
Mix-Mono: Output of left and right mixed audio signals
Dynamic
Use this function for setting the linear, dynamic compression
ratio that can be used to implement various signal
compression effects. The greater the compression ratio, the
smaller the difference between highs and lows. This option
is only available for Dolby Digital audio.
As shown above, switch into the sub-menu and select the
desired value with ▲▼. Use ENTER to confirm and ◄ to
end setting.
HDCD Setup:
Filter
As shown above, switch into the sub-menu and select the
desired value with ▲▼.
Options are: Off, 1x, 2x. Use ENTER to confirm and ◄ to
end setting.
39