Tv Operation And System Setup; Image Setting - Odys MultiFlat 20 DVD Manual Del Usuario

5 TV operation and System Setup

Preparations
1. After connection, press the POWER button to turn on the power. If it is turned on, the power
indicator is blue.
2. Press the SOURCE button to change to TV mode. You can go on with the following operations.
TV mode settings are explained in the following section. The procedure in other modes is
the same.
These settings can only be made when an input signal is present.

5.1 Image Setting

Press the MENU button once to enter the setup
menu, as shown on the right.
In the setup menu, press the ▲▼ button to select the
option Image and press the ENTER button to confirm
selection. Press the ▲▼ buttons to select the
desired items and press the ENTER button. Press
the MENU button to return to the previous menu,
press the EXIT button to exit the setup menu.
Scheme Setup
Press the ▲▼ button to select Scheme. Press the
ENTER button to confirm and enter. Press the ▲▼
button to select item and press the ENTER button to
confirm selection. Press the MENU button to return to
the previous menu.
Picture Setup
Press the ▲▼ button to select Picture and press the
ENTER button to confirm. Press the ▲▼ button to
select item, press the ENTER button to confirm
selection. Press the MENU button to return to the
previous menu.
20
ODYS MultiFlat 20" DVD