Connecting To External Av Signal Source; Connecting To External Av Signal Source (Y/Pb/Pr); Connecting To External Av Signal Source (Scart) - Odys MONO X26 Manual Del Usuario

4.2

Connecting to External AV Signal Source (Y/PB/PR)

Use the audio and video cables to connect the Y/PB/PR input jacks on the rear panel
of the unit to the external AV signal source.
After connection, turn on the power of the unit and the external AV signal source. Press SOURCE then
direction buttons to select Component mode, and then press the OK button to confirm.
4.3

Connecting to External AV Signal Source (SCART)

Use the SCART cables to connect the SCART input Jacks on the rear panel of the unit to the external AV
signal source.
After connection, turn on the power of the unit and the external AV signal source. Press SOURCE then
direction buttons to select SCART mode, and then press the OK button to confirm.
Please only use the provided SCART Adaptor.
Hold the adapter in the hand while insuring that the arrow on the connector side is
visible. While using the thumb and forefinger to press together the grey clips of the
adapter, connect the plug to the appropriate jack found on the rear side of the device.
To remove the adapter, press together the grey clips and pull the plug out of the jack.
12
ODYS MONO X