Advanced Operations; Clock; Clock Adjustment; Lcd Brightness - Kenwood Nexedge NX-700 Manual De Instrucciones

CLOCK

If activated by your dealer, your transceiver can track the time with its built-in
clock. The time will display momentarily when the transceiver power is turned ON.
Additionally, you can view the clock any time by pressing the key programmed as
Clock.
Note: Removing the transceiver power for extended periods will cause the clock time to clear.

■ Clock Adjustment

To set the time:
1 Press the key programmed as Clock Adjustment.
• The current time setting appears.
2 Press the
3 Press the
4 Repeat steps 2 and 3 to set the day, hour, and minute.
5 Press the
• You can press

LCD BRIGHTNESS

The LCD backlight can be turned off or set to low or high levels. To cycle through
the brightness settings, press the key programmed as LCD Brightness.
• Each press of LCD Brightness cycles the brightness level from high to low to off, and
then back to high.

HORN ALERT

To use the Horn Alert function, your dealer must install an optional unit. When
a call is received that matches the optional signaling set up on your transceiver,
Horn Alert causes the vehicle horn or some other external alert to sound. This
function notifi es you of a received call when you are away from your vehicle.
To toggle Horn Alert ON and OFF, press they key programmed as Horn Alert or
access the Horn Alert function through the Menu {page 12}.
• HA momentarily appears on the display when Horn Alert is active.
26

ADVANCED OPERATIONS

/ keys to increase or decrease the year setting.
key to set the year and cycle to the month setting.
key to exit Clock Adjustment mode.
at any time to exit Clock Adjustment mode.