General Instructions - BH HIPOWER G660 Manual De Instrucciones

GENERAL INSTRUCTIONS

The electronic monitor is designed to be easy and intuitive
to use. The messages that appear on the bottom screen
(B) will guide the user throughout the whole exercise.
Nevertheless, we recommend that the gym instructor
reads through this section carefully to become fully
familiar with the electronic monitor in order to show the
user how to operate it correctly.
NOTE: The monitor will switch back to stand-by mode
after 4 minutes if no keys are pressed. The monitor can be
switched back to READY by pressing the STOP key.
PERSONALISING THE ELECTRONIC
MONITOR.-
Follow the procedure below to access the monitor's
personalisation mode:
With the machine and the monitor switched off, press and
hold the RESET key and turn the main switch (b) to
position 1 Fig. (A), located at the bottom front of the
machine.
1) CHANGING LANGUAGE.-
With the monitor on, the word "LANGUAGE" will appear
flashing on the alphanumeric screen (B), Fig.2. Press the
ENTER key and the current language will start flashing.
Select your language using the UP▲ and DOWN▼ keys
and then press ENTER, the word "LANGUAGE" will start
flashing again, using the DOWN▼ key , pass on to the ( 2
SOUNDS) setting.
2) CHANGING THE SOUND.-
With the word "SOUNDS" flashing, press the ENTER key
and the word ON or OFF will start flashing. Select the
flashing value using the UP▲ and DOWN▼ keys and
then press ENTER to confirm, the word "SOUNDS" will
start flashing again, using the DOWN▼ key to pass to the
(3 Text) setting.
3) CHANGING THE WELCOME MESSAGE.-
With the word "TEXT" flashing, press the ENTER key and
the word ON or OFF will start flashing. Select the option
that is flashing by using the UP▲ and DOWN▼ keys
choosing the ON option allows you to change the
monitor's welcome message.
Once the ON option has been selected, press the ENTER
key and a flashing cursor will appear on the alphanumeric
screen (B). Use the UP▲ and DOWN▼ keys to enter a
welcome message letter by letter. Once you have finished
entering the message, press the ENTER key for a few
seconds and the word "TEXT" will start flashing. Use the
DOWN▼ key to pass on to the (4 Manual T) setting. If you
wish to exit the personalisation mode press the STOP key.
Fig.A.
English
4) MAX. EXERCISE TIME.-
With the word "MANUAL T" flashing, press the ENTER
key and a figure between 0 and 60 minutes will start
flashing. Select the flashing value using the UP▲ and
DOWN▼ keys and then press ENTER to confirm, the
word "MANUAL T" will start flashing again, using the
DOWN▼ key, pass on to the (5 SPR TIME) setting.
5) STEADY PULSE RATE TIME.-
With the word "SPR TIME" flashing, press the ENTER key
and a figure between 20 and 60 seconds will start
flashing. Select the flashing value using the UP▲ and
DOWN▼ keys and then press ENTER to confirm, the
word "SPR Time" will start flashing again.
If you wish to exit the personalisation mode press the
STOP key.
CHANGING FROM km to Miles.-
To change from km to miles press the ENTER key for 10
seconds, this will take you to the change option, displaying
"KM" on screen (B). Use the incline Λ and incline V keys
to select the speed measure scale (METRIC / km. --
IMPERIAL / Miles) and press the ENTER key.
ELEMENTS OF THE ELECTRONIC
MONITOR (Fig 1).-
The electronic monitor is made up of two distinct areas:
The top area, Fig. 2 (A – B – C) for the DISPLAY
The bottom area, Fig. 3 (E – F – G) for the KEYPAD
DISPLAY.
This area comprises of two screens.
(A) The top LED array, which displays real-time exertion
levels being produced during the selected program.
(B) Bottom alphanumeric screen, which guides the user
selection options and exercise.
The top screen (A) displays the various pre-programmed
exercise profiles (programs) that we can select and,
during exercise, current exertion levels.
The bottom alphanumeric screen (B) is used to guide the
user when selecting the exercise to do, as well as
displaying information about the exercise both during and
after the session. The LED indicators (C) located below the
alphanumeric screen give a simultaneous readout of
SPEED; TIME/DISTANCE; CALORIES /INCLINE; PULSE
RATE and indicate which information is being displayed
throughout the exercise.
The data that are displayed on the LEDs (C) during
exercise are as follows:
-SPEED: This displays the linear velocity at which the belt
is travelling. The value is displayed in kilometres per hour
(km/h).
-TIME: This shows the time that has elapsed since you
started the exercise or, if a time limit has been
established, the amount of time left before the exercise
finishes. The time is displayed in minutes and seconds
(mm:ss).
9