Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WIRELESS VIDEO SURVEILLANCE CAMERA PNI IP550M
TECHNICAL SPECIFICATIONS:
Pixels
Sensor
Minimum illumination
Electronic Shutter
Day / night mode
Frames per second
Image settings
Alarm
Protocol
Ethernet
Lens
Power supply
Consumption
Dimensions
Weight
Working temperature
HOW TO ADD CAMERA INTO THE NVR SYSTEM:
1.
Right-click on the main screen, select
Note: If you want to pair a single camera, connect the IP camera and the NVR with an Ethernet
cable. If you want to pair multiple cameras, connect the NVR cameras via a switch.
2.
After you click
Match Code
3.
After completing the pairing procedure, click
the desired cameras.
Note: Cameras in the PNI House WiFi550 kit are paired from the factory, no need to follow the
camera adding procedure. The images captured by the cameras will be automatically displayed
immediately after powering up the NVR and cameras. If you want to add additional cameras,
follow the steps above.
720P, INDOOR AND OUTDOOR
1.0MP 1280 x 720
CMOS 1/4
Color [email protected]; B/W [email protected]
NTSC: 1/30-1/10000s; PAL: 1/25-1/10000s
IR Cut
50Hz 25FPS; 60Hz 30FPS
Brightness, contrast, saturation, gain control, shutter,
white balance
Motion detection, video signal loss, no connection, IP conflict
TCP/IP, DHCP, HTTPS, NTP, DNS,RTP, RTSP
1 x RJ45 10/100mbps
3.6mm
DC 12V 1A
≤6W
60 x 183 x 60 mm (bracket included)
400 g
-26 ~ +60°C
IP Camera
, the system will synchronize the camera and the NVR.
2
-
-
Add
Match Code
, then
Search
Add all
.
or the "+" icon to add only
EN
Tabla de contenido
