WIRELESS VIDEO SURVEILLANCE CAMERA PNI IP550M
TECHNICAL SPECIFICATIONS:
Pixels
Sensor
Minimum illumination
Electronic Shutter
Day / night mode
Frames per second
Image settings
Alarm
Protocol
Ethernet
Lens
Power supply
Consumption
Dimensions
Weight
Working temperature
HOW TO ADD CAMERA INTO THE NVR SYSTEM:
Note: The IP550MP wireless camera is only compatible with the PNI House WiFi550
Wireless NVR (supports up to 8 cameras).
1.
Right-click in the main interface of the NVR and select [IP
Camera]
2.
If you add a single camera, connect the camera and the NVR
via an Ethernet cable. If you add more cameras, connect the
cameras to a switch, then connect the switch to the NVR
3.
Click [Match Code]. The system will pair the camera with the
NVR.
4.
Click [Search], then [Add All]
Note: The cameras from the PNI WiFi550 Kit are paired from the
factory.
720P, INDOOR AND OUTDOOR
1.0MP 1280 x 720
CMOS 1/4
NTSC: 1/30-1/10000s; PAL: 1/25-1/10000s
IR Cut
50Hz 25FPS; 60Hz 30FPS
Brightness, contrast, saturation, gain control, shutter,
white balance
Motion detection, video signal loss, no connection, IP conflict
TCP/IP, DHCP, HTTPS, NTP, DNS,RTP, RTSP
1 x RJ45 10/100mbps
3.6mm
DC 12V 1A
≤6W
60 x 183 x 60 mm (bracket included)
400 g
-20 ~ +60°C