Watts tekmar 519 Guía De Instalación Rápida página 4

Display
Installer settings. Press the
Room
F
MAX
F
For a full list of settings and operational details, please refer to the
thermostat Installation and Operation Manual 519_D that is available from
tekmarControls.com
519 _ Q - 06/16
Setting
and
AUXILIARY SENSOR
Select the type of auxiliary sensor. Available when an auxiliary
sensor is automatically detected. NONE = no auxiliary sensor,
ROOM = Indoor Sensor, OUT = Outdoor Sensor, FLOR = Slab
Sensor
ROOM SENSOR
Select if the built-in room temperature sensor is on or off. The
built-in room sensor can only be disabled when an auxiliary room
or slab sensor is connected.
FLOOR MAXIMUM
Set the floor maximum temperature in order to protect the floor
covering. Suggested settings: Tile = 90°F (32°C), Wood Floor =
85°F (29°C)
SET AWAY
Set the away temperature.
ESCAPE
Release the and
buttons together for 5 more seconds.
buttons to return to the home screen.
All specifications are subject to change without notice.
Tel: (250) 545-7749 • Fax: (250) 984-0815
4 of 12
tekmarControls.com
© 2016 tekmar