Inserting And Placing The Hearing Aid; Troubleshooting - Microson m2 BTE AT Manual De Uso

INSERTING AND PLACING THE HEARING AID
1 2
1. Carefully insert your mould or adapter into the ear
canal.
2. Place the hearing aid behind the ear.
3. Check that the device is correctly supported.
DOMES/ADAPTATERS AND MOULDS
WARNING!
• Risk of injuries caused by incorrect use of the domes,
adapters or moulds.
• Always use the receiver tube with a receiver dome,
adapter or mould.
• Make sure that the receiver domes/adapters or
moulds are correctly attached to the earpiece tube
(press until you hear a click).
• If the receiver dome/adapter or mould becomes lodged
in the ear, ask a medical professional to remove it.
• Carefully insert the earpiece tube in the ear with the
receiver dome/adapter or mould without inserting it
too far.
• Only use the earpiece tube and the receiver dome/
adapter or mould as described in this User Manual.
EN
3
32
SYMPTOM POSSIBLE CAUSE
Spent battery.
The hearing aid
does not work Defective hearing
Mould or adapter
Volume too low. blocked or
obstructed
Distorted or
Spent battery
unclear sound
Manufacturer's customer service:
NOTE
For any other problems or queries, please contact your hearing
care specialist or retailer.
33

TROUBLESHOOTING

SOLUTION
Replace battery.
Consult your
hearing care
aid
specialist.
Remove the
obstruction and
clean the adapter
or mould.
Replace battery
+34 93 300 58 00
[email protected]
EN