Idiomas disponibles
Idiomas disponibles
10/12
Once the "Quick shift" has been set, the throttle grip and clutch lever
Operation of
"Quick Shift"
operations are not required in the shift change operation.
1. Set the "QS SET" to <1> or <2>.
NOTE: For the "QS SET" setting, refer to "Setting of Quick Shift".
2. Squeeze the clutch lever and shift the gear into the 1st position.
3. When performing a shift change, operate the gearshift lever without
using the clutch lever.
• When the shift change operation is to be performed, the motorcycle
adjusts the engine speed according to the situation at that time, so
the throttle grip operation is not required.
• The "Quick shift" is activated when the engine speed is 2000 rpm or more.
• Even when the "Quick shift" has already been set, the shift change
operation using the clutch lever is available.
When the shift change operation is to be performed using the clutch
lever, simultaneously, close the throttle and squeeze the clutch lever
firmly.
• When the shift change operation is to be performed, move the gear-
shift lever until you feel it at the end.
• When the quick shift indicator "QS" blinks, the "Quick shift" is not
available.
• Operating the gearshift lever without using the clutch lever
when the "Quick shift" is set to "OFF" can damage the engine
or drive system.
When the "Quick shift" is set to "OFF", use the clutch lever.
• When the engine speed is 2000 rpm or less, the "Quick shift" is
not available. In this case, operating the gearshift lever without
using the clutch lever can damage the engine or drive system.
Use the clutch lever to perform a shift change at the engine
speed of 2000 rpm or less.
NOTE: During riding, the quick shift indicator "QS" blinks in the following cases.
4. When the motorcycle is to be stopped, stop it with the clutch lever
squeezed.
GENUINE SUZUKI ACCESSORIES
• The shift operation is performed at the engine speed of 2000
rpm or less.
• The shift operation is performed with the clutch lever squeezed.
• The shift down operation is performed with the gear shifted to
the 1st position, or the shift up operation is performed with the
gear shifted to the 6th position.
NOTICE
