Suzuki 25502-1781 Guia De Inicio Rapido página 5

6. Connect the coupler A of the
Wiring harness 4 to the TO
sensor coupler, and put the
coupler A of the Wiring har-
ness 4 between the frame and
ABS hydraulic unit.
7. Install the fuel tank rear bracket
and tighten the bolts to speci-
fied torque.
Tightening torque
Bolt: 10 N·m (1.0 kgf-m, 7.5 lbf-
ft)
8. Tighten the other screws.
NOTICE
To avoid malfunction of the
IMU, check the following fac-
tors.
• There is no abnormality in
installation position or angle
of the IMU and the IMU
holder bracket spacers.
• There is no deformation of
the fuel tank rear bracket,
IMU holder bracket and IMU
holder.
Wiring harness
TO sensor coupler
To Gearshift
sensor
To TO sensor
coupler
Fuel tank
rear bracket
Bolt
Screw
GENUINE SUZUKI ACCESSORIES
ABS hydraulic unit
Wiring harness
To TO sensor
Bolt
Screw
Bolt
5/12
Bolt