Quick Reference Guide For Programming - Hobby Biothermpro Instrucciones De Uso

4. Quick reference guide for programming

Switching to program mode:
Switching to operating mode:
Cancel programming:
Backlighting:
Manual deactivation of an audio signal: An audible alarm signal can be deactivated pressing any key. The audio
Manual activation/deactivation:
Pressing the button while in operating mode will activate
the program mode.
Having completed your settings in program mode, you can return to
operating mode by pressing the
is pressed for 90 seconds, the system automatically switches back from
program to operating mode. Programmed values are saved.
If you want to cancel all changed values please unplug device before
returning to operating mode. Changed values will not be saved.
It is possible to toggle between permanent illumination of the display and
automatic deactivation of illumination. Press and hold the ▲ button in
operating mode and then press Taste ▼. If the illumination is switched off
and the device beeps twice, the display illumination is in automatic mode
(backlighting is automatically switched off after 120 seconds of inactivity).
When the backlighting is turned on and you hear a single beep,
it will remain permanently on.
signal will only sound again when the next deviation from the programmed
desired value is detected.
Both slots can be turned on and off manually. To activate slot 1 (
hold ▲, then press
deactivated. If you press it a third time, program mode for slot 1 (
reactivated.
The second line in the display indicates "on", "OFF" or the temperature
value you programmed.
), hold ▲, then press
To activate slot 2 (
second time, slot 2 (
mode for slot 2 ( ) is reactivated.
The third line in the display indicates "on", "OFF" or your programmed
temperature value. If slot 2 (
temperature-controlled, "P ON" or "P OFF" appears on the display
indicating permanently ON or OFF.
button for 3 seconds. If no button
. Press these buttons a second time, slot 1 (
) is deactivated. If you press it a third time, program
) is time-controlled and not
),
) is
) is
. Press these buttons a
7