Tabla de contenido
Audífono izquierdo
Audífono derecho
2b. Sóquet de entrada (IN) de carga
2f. Botón de aumento de volumen (VOLUME UP) digital
2c. Interruptor SRS
2g. Botón de reducción de volumen (VOLUME DOWN) digital
2d. Luz indicadora LED SRS
2h. Luz indicadora LED de encendido/apagado (ON/OFF)
2e. Compartimiento de baterías
2i. Botón de sintonía fina (FINE TUNING) digital automática
2j. Botón de encendido/apagado (ON/OFF)
2c. Interruptor SRS
2e. Compartimiento
de baterías
2d. Luz indicadora LED SRS
2b. Sóquet de entrada
(IN) de carga
Accesorio de carga
3a. Enchufe hembra de entrada de codo del cable de carga
3b. Enchufe hembra de entrada recto del cable de carga
3b. Enchufe hembra de entrada
recto del cable de carga
3a. Enchufe hembra de entrada de
codo del cable de carga
43
ADVENT ADVW791 Audífonos inalámbricos estereofónicos con transmisor de 900 MHz
2h. Luz indicadora LED de
2f. Botón de
encendido/apagado (ON/OFF)
aumento de volumen
(VOLUME UP) digital
2j. Botón de encendido
/apagado (ON/OFF)
2g. Botón de reducción de volumen
2i. Botón de sintonía fina
(VOLUME DOWN) digital
(FINE TUNING) digital automática
Operation
NOTE: The transmitting station has an automatic
function that turns it off if the audio input jack does
not receive an audio signal for approximately 90
Stereo Wireless Headphone
seconds. This feature was installed to comply with
1. Turn on the audio component (DVD, DBS, CD, TV,
current legislation that reduces the amount of radio
emissions in the environment. To ensure that this
VCR, stereo receiver or radio) to which the
function is not accidentally triggered, set the audio
transmitting station is connected. If your audio
source volume at approximately 50 percent capacity.
source is a DVD or CD player, start a disc.
2. Adjust the volume on the audio component to a
Consult your component user's manual for details on
how to set the volume for headphone/earphones.
comfortable level.
NOTE: If the transmitting station is connected to the
4. Turn on the headphone, using the ON·OFF button
audio source via a stereo Y cable (1g), the volume of
the audio component's speakers is not affected.
However, if the transmitting station is connected to the
5. Press the VOLUME DOWN button (2g), located on
headphone socket, the speakers of the original audio
source are disconnected when the headphone socket
6. Put on the headphone. The headphone is labeled
is in use. In this case, set the volume of the audio
source before connecting the transmitting station to
the audio component.
3. The ON/OFF LED indicator light (1b) on the
7. Press the automatic digital FINE TUNING button (2i)
transmitting station turns on, indicating it is ready
for use.
ADVENT ADVW791 900 MHz Stereo Wireless Headphone
(2j), located on the right earphone. The ON/OFF
LED indicator light (2h) on the right earphone turns on.
the right earphone, to a low level before putting the
headphone on.
on both sides: L for left; R for right. The headphone
features a dual headband for comfort and
personalized fit.
once. The FINE TUNING button is located on the right
earphone. It will automatically adjust for
maximum reception.
12
Capítulos
Tabla de contenido
