9�4�2 USB management
This option can be used to carry out various operations with a USB pen drive inserted into one of the two USB ports
on the power source front panel.
When a USB pen drive is inserted into one of the two USB ports, the status bar shows the icon
Remove
Select this option before removing the pen drive from the USB port.
Firmware Update
Select this item to update the power source firmware.
The update file loaded onto the USB pen drive must have the extension .psu.
Insert the pen-drive into the power source USB port
INSTRUCTION
Install Options
Select this item to install the options in the power source.
86/107
Select Menu -> Settings -> USB Management.
Turn B and select the relevant option.
The update operation does not mean that programs and welding data contained in
the machine will be lost.
Turn B and select Firmware Update.
On the File List page, select the file to be loaded by turning B and
confirm using the button with the checkmark indicated.
Removal of the USB pen drive will then be requested and the
machine will proceed with the update.
After the update, the machine will restart by itself.