Cebora ARCO Manual De Instrucciones página 104

Mains voltage U
1
Tolerance U
1
Mains frequency
Delayed fuse
Power consumed
Mains connection Zmax
cos Phi
Welding current range
X (duty cycle)
According to standard IEC 60974-
1
Open-circuit voltage U
High-frequency power-on voltage
Up
Maximum welding gas pressure
EMC emissions class
Performance
Consumption in stand-by
Overvoltage class
Degree of pollution according to
IEC 60664
Certifications
Degree of protection
Weight
Dimensions (WxDxH)
This equipment complies with standards IEC 61000-3-12 and IEC61000-3-11 provided that impedance of the supply
line in the PCC is less than Zmax shown in the table.
The fitter or the unit user are responsible for ensuring, consulting the distribution network operator if necessary, that
the equipment is connected to a power supply with a maximum system impedance lower than Zmax.
The tables in section 2.3 show the technical data of welding power sources for the two processes used in the field
of industrial automation, which are the TIG or Plasma Welding (PW) processes. When in manual mode, the power
sources are able to weld using a coated electrode (MMA). For more details, refer to manual 3301017.
(*) Refer to the value given for Item 465.01.
104/107
TECHNICAL SPECIFICATIONS TABLE
TIG
16A
10 kVA 40
8.3 kVA 60%
7 kVA 100%
3 ÷ 340 A
340 A 40%
300 A 60%
270 A 100%
0
10.3 kV
6bar / 87psi
560x950x1010 mm
380
PW
3 x 400 V
±15%
50/60 Hz
16A
10.4 kVA 30%
9.1 kVA 60%
8.7 kVA 100%
0.087 Ώ
0.99
10 ÷ 250 A
250 A 30%
230 A 60%
210 A 100%
57V
(*)
N.A.
A
>80%
<50W
III
3
S, CE
IP23S
69 Kg
381
TIG
3 x 400 V
±15%
50/60 Hz
25A
20.3 kVA 60% 23.2 kVA 60%
16.5 kVA 100% 20.1 kVA 100%
0.065 Ώ
0.99
3 ÷ 500 A 10 ÷ 420 A
500 A 60%
420 A 60%
440 A 100%
380 A 100%
70V
12.1 kV
6bar / 87psi
A
>80%
<50W
III
3
S, CE
IP23S
108 Kg
588x1120x1010 mm
PW
32A
(*)
(*)