Gas Regulation Kit - Cebora ARCO Manual De Instrucciones

9�3�2 Welding mask
T-LINK system that resets reaction time of the filter mounted on the welder's mask wirelessly, ensuring maximum eye
protection and reduced eye fatigue. For details, refer to the user manual for Item 434.
If the mask is recognised, the icon appears in section S of the display
As soon as welding current starts to flow through the workpiece, the mask is automatically darkened. To check the
function, press the "DARK" key on the display and ensure the mask glass goes dark.
9�3�3 Gas regulation Kit
The kit allows precise adjustment of the gas flow during welding and can only be used for TIG type processes.
For details, refer to the Item 436 user manual.
9�3�4 Input potentiometer
ON allows the potentiometric input on connector P to be read.
OFF potentiometric input variations are ignored.
9�3�5 Secondary panel
The WinTIG series power source can manage the remote panel accessory Item 438. This panel can be used to set the
main welding parameters in TIG processes. For more details, refer to the instruction manual of kit Item 438.
Whenever an external accessory is connected, refer to the terminal table in section 11�3 for correct system
operation
84/107
Select ON and press PAIR
NOTICE
.