Other Panel Functions; Job Management; Saving A Welding Job; Modifying A Job - Cebora ARCO Manual De Instrucciones

MMA process, not available in power sources 394.80, 395.80, 396.80, 380.80, 381.80 when the robot interface is active.
9

OTHER PANEL FUNCTIONS

9�1

Job management

A welding programme and its parameters (process, ignition, mode etc.) can be saved on the JOB page.
The available JOBS are numbered and range from 1 to 99.
The operations that can be carried out on a JOB are listed below:
Save
Retrieve
Delete
Copy
Details of the saved JOB.
Saving a particular job on a USB drive. The target file format is file_name.zip. The icon is present if a
physical USB backup drive is inserted.
9�1�1 Saving a welding JOB
9�1�2 Modifying a JOB
80/107
NOTICE
Choose the memory position where the job is to be saved and confirm by
pressing encoder B. A description of the saved process will now appear.
Save by pressing the key
Select the relevant JOB
Retrieve by pressing pushbutton
Modify the welding parameters.
Select JOB section I – Fig. 4.
Overwrite the previous JOB or create a new one by selecting a free memory
location and pressing
.