Troubleshooting Guide; Tool Specifications - Bostitch BRN175 Manual De Operación Y De Mantenimiento

If your warning labels become illegible or are missing, call 1-800-556-6696
for a free replacement. In Canada please call us at 1-800-567-7705 or visit
www.BOSTITCH.com.
MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART
BELOW. FOR MORE SERIOUS OR PERSISTENT PROBLEMS, CONTACT A BOSTITCH
SERVICE CENTER OR CALL 1-800-556-6696.
air from tool and engage trigger lock, before all repairs.
SYMPTOM
Air leak near
top of tool or in
trigger area
Tool does nothing or
operates sluggishly
Air leak near
bottom of tool
Tool jams frequently Incorrect fasteners.
Other
Height (inch/mm)
Width (inch/mm)
Length (inch/mm)
Weight (lbs/kg)
Recommended Operating Pressure 70-120 psi (4.8 to 8.3 bar)
Air Consumption per 100 cycles
Loading capacity
BRN175_9R209323_MAN_kf V2_multi.indd 13
WARNING LABEL REPLACEMENT
To reduce the risk of serious personal injury, ALWAYS disconnect
PROBLEMS
Loose screws.
Worn or damaged
o-rings or seals.
Inadequate air supply.
Inadequate lubrication.
Worn or damaged
o-rings or seals.
Loose screws.
Worn or damaged
o-rings or bumper.
Damaged fasteners.
Bent collation wire.
Canister or nose
screws loose
Canister is dirty.
Driver tip is worn
or damaged.

TOOL SPECIFICATIONS

TROUBLE SHOOTING GUIDE:
SOLUTIONS
Tighten screws.
Install Overhaul Kit.
Verify adequate air supply.
Put 5 or 7 drops of
oil into air inlet.
Install Overhaul Kit.
Tighten screws.
Install Overhaul Kit.
Verify approved fasteners
of correct size and 15°
collation angle.
Replace with undamaged
fasteners.
Tighten screws.
Clean magazine.
Install Driver Maintenance Kit.
Contact a BOSTITCH
Authorized Warranty
Service Center
BRN175
10.63/ 270
4.33/ 110
10.24/ 260
4.78/ 2.17
4.13 CFM
120 nails
13 - ENG
1/28/15 7:41 AM