Fireplace Installation - Dimplex DFR2651L El Manual Del Propietario

Fireplace Installation

WARNING: Ensure the power
cord is not installed so that it is
pinched or against a sharp edge
and ensure that the power cord is
stored or secured to avoid tripping
or snagging to reduce the risk
of fire, electric shock or injury to
persons.
WARNING: Construction and
electrical outlet wiring must comply
with local building codes and other
applicable regulations to reduce
the risk of fire, electric shock and
injury to persons.
WARNING: Do not attempt
to wire your own new outlets or
circuits. To reduce the risk of fire,
electric shock or injury to persons,
always use a licensed electrician.
WARNING: To reduce the risk
of fire, do not store or use gasoline
or other flammable vapors or
liquids in the vicinity of the heater.
Figure 1
6
Glass Installation
(if applicable)
1. Unpack the firebox and the
front glass.
2. Place the firebox on its back.
Remove the glass retaining
brackets from the sides of the
firebox. (Figure 1)
3. Slide the glass into the glass
support track on the top, until it
is fully inserted.
4. Reinstall the removed glass
retaining brackets tight against
the glass.
Dimplex Mantel
Installation
Depending on the available space
within the mantel cavity, the unit
can be secured to the mantel at
the bottom side or back. Remove
the screw on the bottom flange
www.dimplex.com