16
Preparation
This fully automatic espresso/coffee
machine grinds beans freshly for each
brew. If possible, use only beans for fully
automatic coffee and espresso machines.
Deepfreeze or store in a cool place in
sealed, airtight containers. Coffee beans
can be ground while frozen.
Tip: Prewarm cups, especially small, thick
espresso cups, by placing on the cup shelf
16 or rinsing with hot water.
Using coffee beans
The appliance must be ready for use.
● Set the desired percup quantity using
dial .
● Select the desired coffee strength using
button
.
5
● Place the prewarmed cup(s) under the
coffee outlet 10.
● Press the coffee dispensing button
once for 1 cup or twice within three
seconds for 2 cups. The coffee is brewed
and dispensed into the cup(s).
Note
If you select two cups, the grinding and
brewing process is performed twice.
● Coffee dispensing stops automatically
when the selected quantity has been
dispensed.
The brewing process can be terminated
i
by pressing the coffee dispensing button
again. When coffee is brewed for
4
2 cups, it is dispensed via two outlet
nozzles (place the cups side by side).
Robert Bosch Hausgeräte GmbH
Using ground espresso/
coffee powder
The appliance must be ready for use.
● Set the desired percup quantity using the
dial .
● Place the prewarmed cup(s) under the
coffee outlet 10.
● Open the cover of the ground coffee duct 15.
● Add one to two level scoops of ground
coffee (grind: mediumfine) to the ground
coffee duct 15.
Note
Do not add whole beans or instant coffee!
Use a maximum of two level scoops of
coffee.
● Close the cover of the ground coffee duct 15.
● Press the coffee dispensing button
Repeat the process if a second cup is
i
desired.
Note: If coffee is not brewed within 90
seconds, the brewing chamber is emptied
automatically in order to prevent overfilling.
4
The appliance is rinsed.
Preparing hot water
The appliance must be ready for use. This
function allows water to be heated for a cup
of tea, for example.
Risk of burns
!
The foaming nozzle 9 gets very hot. Hold it
by the plastic part only.
●
Place an appropriate cup under the
foaming nozzle 9.
●
Turn the rotary knob 9a to the centre.
●
Turn the dial 8 to
Risk of scalding
!
When the dial is set to
may sputter a little. Do not touch the
foaming nozzle 9 or aim it at anyone.
●
Water runs into the cup.
●
End the process by turning the dial 8
back to
/
.
g
h
/
g
h
●
.
en
.
4
the nozzle