Recommended Use; Tool Composition - CAMPAGNOLA Cobra V.Evo Manual De Uso Y Mantenimiento

3.4 Recommended use

The tool has been created for cutting and pruning according to the above-described manners and limits.
WORNING!
Any other use has to be considered improper and potentially dangerous for the operators' safety. This would
•
make any warranty claims void.
•
If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and
bystanders and damages to equipment and things.

3.5 Tool composition

POS. DESCRIPTION
1 Battery unit
2 Braces buckles
3 Belt buckles
4 Backpack
5 Holster
6 Shear connector
7 Display connector
8 Battery charger connector
9 Battery led light
10 Display
11 ON/OFF selector
12 Power supply cable
13 Front cover screws
14 Front cover
15 Trigger
16 Shear led light
17 Blade
18 Anvil
19 Blade group
20 Trigger protection
21 Flexible electronic unit
22 Selector
23 Locking nut
24 Blade-drive gear
25 Blade pin
26 Arm cable-fastener
27 Cable loops
28 Braces
29 Flared-headed screw
30 Shear housing
31 Washers
32 Battery holder
33 Loop
34 Battery charger
35 Flexible electronic unit screws
Campagnola Srl – USE AND MAINTENANCE MANUAL – Translation of the original Instructions
Ver.1.0 - Rev.: 01, Data: 21/01/2016 Mod. FOEL.600/601/602 - POWE.0200
FUNCTION
Operates the shear
Fasten the braces to the shoulders
Fasten the backpack
Allows to carry the battery and the display and to hang the shear
Allows to carry the shear
Connects the shear to the flexible electronic unit
Connects the display to the flexible electronic unit
Allows to recharge the battery
Allows to check the battery charge level
Shows the shear modes
Switches the battery on and off
Connects the shear to the battery
Fix the front cover on the shear body
Allows to replace the blades
Operates the shear
Shows whether the shear is on or off
Is the cutting blade
Locks the branch
Allows to cut the branches
Avoids any accidental tool operating
Contains the flexible circuit board which operates the shear
Allows to choose the shear modes
Locks the blade group and allows to adjust it
Transmits motion to the cutting blade
The cutting blade rotates on it
Makes the cable movements easier
Allow to fasten the cables to the backpack
Hold the battery weight
Locks the cutting blade on the shear housing
Holds the blade group
Distribute the pin pressure on the blade-drive gear
Allows to fasten the battery to the backpack
The backpack fixing belt goes through it
Allows to charge the battery unit
Fix the flexible electronic unit on the battery
PICTURE
D-E
G-F
G-F
F-G
F-G
A-D
B-D
E
D
B-G-F
E
A
C
C
A-C
A-C
C
C
A
A
D-E
B
C
C
C
F
F
F-G
C
C
C
E-G
E-F
H
D-E
Pag.31