Using The Automatic Brew Timer; The Cleaning Needed Indicator - KitchenAid JAVASTUDIO KCM511 Manual De Instrucciones

Operating Your Coffee Maker

USING THE AUTOMATIC BREW TIMER

The Coffee Maker can be programmed to
brew coffee at a preset time, making it easy
to wake up to fresh coffee every morning.
To program and activate the automatic
brew timer:
1. Press the Set (Program) Button. The brew
timer display and Set (Program) indicator
will begin to flash. The brew timer
display will show the last brew time set.
2. Press the "H" (hour) and "M" (minute)
Buttons below the brew timer display
to set the hour and minutes. If a "H"
or "M" Button is pressed and held,
the digits will scroll rapidly. The AM
and PM indicator lights on the brew
timer display will change when the
hour digits roll past "12". Make sure
the desired brew time is correct with
respect to AM or PM.
"H" and "M"
Buttons
3. After setting the brew time, press
the Set (Program) Button to exit the
program-setting mode. The Coffee
Maker will automatically record the
displayed brew time and exit the
program-setting mode if no buttons
are pressed for 10 seconds.
4. Fill the Coffee Maker with coffee
and fresh water, then activate the
automatic brew timer by pressing the
Auto On Button. The programmed
brew time will appear briefly on the
brew timer display before it returns
to the time-of-day, and the Auto On
indicator will illuminate.
5. The Coffee Maker will begin brewing
at the programmed time.
6. Each time you want the Coffee Maker
to brew at the programmed time,
activate the automatic brew timer
by pressing the Auto On Button. The
Coffee Maker will always default to
the last brew time set.
NOTE: To cancel automatic brewing,
deactivate the brew timer by pressing the
Auto On Button. When deactivated, the
Auto On indicator light will go out.
If program time has not been set prior
to pressing Auto On button, the coffee
maker will enter program set mode (see
"Using the Automatic Brew Timer" on
page 10).

THE CLEANING NEEDED INDICATOR

Calcium deposits ("scale") from water will
build up in the Coffee Maker heat pump
over time and impair brewing efficiency
and coffee quality. When the Coffee
Maker detects a build-up of scale, the
cleaning needed indicator will light after
a brewing cycle is complete. Once this
occurs, descaling should be done as soon
as possible to preserve the performance
and life of your Coffee Maker. Please see
page 12 for descaling steps.
10