La Pavoni PC-PCL Instrucciones De Uso página 40

•
Clean the injector (D) in warm water to get rid of possible milk rests and clean with a needle the hole
of the steam nozzle
After cleaning please assemble it as follows:
•
Insert the threaded nut (A), the gummy rings (B) and (C) on the steam nozzle (8), insert the injector
(D) and screw the threaded nut (A) clockwise in order to fix the injector.
•
Insert the nozzle cover (E) pushing it upwards.
12.2 - CLEANING OF THE AUTOMATIC CAPPUCCINO MAKER:
Apart from cleaning it every time it has been used, please clean it every now and again more accurately
(picture 2):
•
Remove the silicone tube (B) from the suction tap (D).
•
Unscrew the threaded nut (A) turning it anticlockwise until the steam nozzle comes out (8).
•
Remove the part (F) pressing on its milled sides from the main frothing unit (E).
•
Remove the suction tap (D) from the main frothing unit (E).
•
Remove the regulation knob (C) from the suction tap (D).
Rinse everything thoroughly with warm water to remove possible milk rests and reassemble the automatic
cappuccino maker again.
13 – ESPRESSO COFFEE MACHINE FOR PODS USE WITH E.S.E. SYSTEM (OPTIONAL)
The machine suitable for ground coffee use can be modified for E.S.E. pods following this procedure.
a) Take away the adapter disc (a) and the shower of the grounded coffee (B), unscrewing the screw (C).
b) Place the shower for pod (D) and stop it with the screw (C).
c) Use the filterholder (F) with E.S.E. pods (42 mm diameter) actually in the market.
14 – ESPRESSO COFFEE MACHINE FOR FAP CAPSULE ONLY
When the machine is suitable for capsule use, the same will be normally equipped with a suitable filterhol-
der (G) which will be used with the specific capsules.
39
English