Tabla de contenido
Idiomas disponibles
Idiomas disponibles
_4. Hang the unit on the wall.
0) Hook the unit securely onto the mounting
screws
O-
Connect the FM/AM antenna before hanging the
main unit on the wall (=_page 4).
•
After hanging the unit, release your hand carefully
to confirm the unit sits securely on the wall.
Slot both screws into this position firmly.
5. Install
the
safety
holder.
(1) Fix the safety holder onto the wall bracket.
(2_Drive safety
holder screw O to secure the safety holder onto
the wall.
J
_ll Fall-preventive
measure (Optional)
(1)Thread a wire (commercially
available)
through the slot on the
wall bracket
before step 4 (=_ above).
(2_Fix the wire to the wall with a screw
(commercially
available)
after step 5 (-, left).
Safety holder screw _
Safety holder
• Fix the screw to the wire so that a slack of no more than
5 cm (1 3Vj2") is kept in the upper center part of the main unit.
the wall
(1) Remove
safety holder screw _and
the safety holder.
_2_ Unmount
the unit from the wall.
(3_Unscrew fixing screw _
(2 pieces).
_) Hold down beth the catches and then slide the wall bracket off the unit
(=, right).
(s_Reattach the stand
to the bottom of the unit and secure it with fixing
screw _
(2 pieces).
(_ Remove the mounting
screw O (2 pieces) from the wall.
• Remove the fall-preventive
wire before step (1)if you are using it.
Pen or a blunt object
Catches
o
m
7
Tabla de contenido
