Tabla de contenido
Idiomas disponibles
Idiomas disponibles
i
iii
i
i
iI
Before installation,
turn the unit off and disconnect
the AC power supply cord plug from the AC receptacle.
* Tighten
screws
firmly to prevent slack
in each step.
1. Detach the stand from the unit.
i_ Unscrew the fixing
screw
_
(2 pieces)
at the bottom of the unit.
<z_ Slide the stand off the unit.
Keep the removed screws in a safe olace
Bottom of main unit
Soft blankel
or cloth
Fixing screw 0
_2. Attach the wall bracket to the back of the unit.
1 Align both tabs on the wall bracket and the main unit. then slide it
<2p Secure the wall bracket
with fixing
screw O (2 pieces).
in until it clicks into place.
Wal bracke_
Tab
Rear of
main unit
[Tightening
torque:
1.2 Nm (57/54 Ib-ft) to 1.5 Nm (1 7/64Ib-ft)]
Fixing screw
\
/
F-
o
r'¢
3. Drive the mounting
screws into the wall.
0) Measure and mark the position of the mounting
screw O (2 pieces) and drive them into the wall.
•
Use figures below for screw positions and measurements.
•
Please install using both wall mounting screws.
•
Use a level ruler to ensure both screws are level.
•
Use a screw which is strong enough to support the weight of at least 20 kg (44 lb.).
Rear View
.,/
.,/
/.
130 mm
(5 V_")
///
300 mm (11 W_G") ii
Space required
77.5 mm (3 U_G")
85.5 mm (3 3/8")
500 mm (19 _/_6")
_'X
Mounting
screw
Space required I
A length which supports the strength of
20 kg (44 lb.) or more must be kept for
each screw.
8 mm (5/16") to 9.5 mm (3/8")
i_2.2 mm (3/32") to 2.8 mm (7/64'
mm (3/32") to 3.5 mm (9/64")
700 mm (27 9/_6")
6
Tabla de contenido
