Fcc Note - Panasonic SC-HCC40 Instrucciones De Funcionamiento

The model number and serial number of this product can be found on
either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER SC-HC40
SERIAL NUMBER
User memo:
DATE OFPURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
FCC Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
O Reorient or relocate the receiving antenna.
O Increase the separation between the equipment and receiver.
O Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
O Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded
interface cables must be used with this equipment. Operation
with non-approved equipment or unshielded cables may result in
interference to radio and TV reception. Any changes or modifications
not approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
_ WARNING:
To satisfy FCC RF exposure requirements for mobile transmitting
devices, a separation of 20 cm or more should be maintained between
the antenna of this device and persons during device operation. To
ensure compliance, operations at closer than this distance are not
recommended. The antenna used for this transmitter must not be
co-located in conjunction with any other antenna or transmitter.
FCC ID: ACJ-B21 =R10001
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including
interference that may cause undesired operation.
The Bluetooth word mark and Iogos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Panasonic Corporation is
under license. Other trademarks and trade names are those of their
respective owners.
( )
u.pznt sU hyt;htt n,t w Z':t c Urn?;S:d
how you can maximize the fun and excitement
your equipment offers.
This manufacturer and the Electronic Industries Association's Consumer
Electronics Group want you to get the most out of your equipment by
playing it at a safe level. One that lets the sound come through loud
and clear without annoying blaring or distortion-and, most importantly,
without affecting your sensitive hearing.
We recommend that you avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing "comfort level" adapts to
higher volumes of sound. So what sounds "normal" can actually be loud
and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion. Once you have established a comfortable sound level:
Leave it there.
Taking a minute to do this now will help to prevent hearing damage or
loss in the future. After all, we want you listening for a lifetime.
1. Damage requiring service -- The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing -- Do not attempt to service the unit beyond that described
in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts -- When parts need replacing ensure the servicer
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may
result in fire, electric shock, or other hazards.
4. Safety check -- After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
[ Product information [
For product information or assistance with product operation:
Refer to "Customer Services Directory (United States and Puerto Rico)"
on page 17.
"Made for iPod" means that an electronic accessory nas been
designed to connect specifically to iPod and has been certified by me
developer to meet Apple performance standards.
"Works with Phone" means that an electronic accessory nas Deer
designed to connect specifically to iPhone and has been certified by
the developer to meet Apple performance standards.
Apple is not responsible for the operauon of this device or its
compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered ntne U.S. and other
countries, iPhone s a trademark of ADD_e nc
o
m
3