Cleaning; Disposal; Trouble Shooting - HOLZMANN MASCHINEN ABS 1080 Instrucciones De Operación

15.2

Cleaning

After each workshift the machine has to be cleaned. Remove chips etc. with a suitable tool. Do
not remove them by hand (cutting injury!). Remove dust as well.
The usage of certain solutions containing ingredients damaging metal surfaces
as well as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
15.3

Disposal

Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old.
16

TROUBLE SHOOTING

BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble
The magnetic support has
no magnetic force
Dust emerges from
Loud noise in the fan wheel
housing
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE EXPERTLY CONNECTION TO
THE ELECTRICITY GRID.
HOLZMANN Maschinen Austria
Possible cause
 Switch defective
 Power supply is off
 Fuse is defectivet
 Electric contactor is defective
 Leaking or blocked connections
 Dust bag or filter bag is defective
or incorrectly installed
 Extracting of a big part
 Loosen fan wheel
www.holzmann-maschinen.at
N O T I C E
 Repair switch
 Repair power supply
 Change fuse
 Repair or change electric
contactor
 Check connection
 Remove blockages
 Check bags
 Change defective bags
 Switch of the machine,
disconnect the machine and
remove the part
 Tighten the fan wheel
Odsávací zařízení / dust collector / Aspirador
Solution
Strana 30
ABS 1080