Operation; Operation Instructions; Connection Of Dust Collector To Machine; Start / Stop - HOLZMANN MASCHINEN ABS 1080 Instrucciones De Operación

14 OPERATION

Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
14.1

Operation instructions

Perform all machine settings with the machine being


14.2

Connection of dust collector to machine

Dust collector plug ABS 850: Ø 100mm
Ensure dust collector tubes to be composed of hardly inflammable material and antistatic.
The total distance between dust collector hood of the ABS 3000/4000/5000 and machine dust
collector hood shall not exceed 10 meters.
14.3

Start / Stop

Start: Press the green button ˝I˝
Stop: Press the red button ˝O˝
EMERGENCY-switch:
The flap of the switch unit must always be
opened during operation!
For emergencies push on the red cap. The
machine switched off immediately!
HOLZMANN Maschinen Austria
W A R N I N G
disconnected from the power supply!
Place the machine next to the woodworking machine in a way that it will
not interfere with your work!
Start to work with the woodworking machine only until the dust collector
has reached full speed!
www.holzmann-maschinen.at
H I N W E I S
Odsávací zařízení / dust collector / Aspirador
Strana 28
ABS 1080