Appendix B: Technical Data - Anton Paar DMA 4100 Manual De Instrucciones

Appendix B: Technical Data

Measuring range:
Repeatability, s. d.:
Density:
DMA 4100:
DMA 4500:
DMA 5000:
Temperature:
DMA 4100:
DMA 4500:
DMA 5000:
Measuring temperature:
Pressure range:
Environmental conditions (EN 61010):
Ambient temperature:
Air humidity:
Pollution degree:
Over voltage category:
Amount of sample in the measuring cell:
Typical measuring time per sample:
DMA 4100/4500:
DMA 5000:
Sample throughput:
Wetted parts:
Dimensions (L x W x H):
Weight:
Power:
Fuses:
Interfaces:
COM1, COM2:
PS/2 interface:
Important:
All interfaces are designed to comply with SELV (Separated Extra-Low
Voltage) requirements according to EN 60950. Interfaces which do not comply
to SELV requirements must not be connected.
XDLIB28
3
0 to 3 g/cm
-5 3
5 x 10 g/cm
-5 3
1 x 10 g/cm
-6 3
1 x 10 g/cm
0.02 °C
0.01 °C
0.001 °C
0 °C to +90 °C (32 to 194 °F)
0 to 10 bar (0 to 150 psi)
Indoor use only
+15 to +35 °C (+59 to +95 °F)
10 to 90% relative humidity, non-condensing
2
II
approx. 1 mL
approx. 30 seconds
approx. 40 seconds
10 to 30/hour
Borosilicate glass, PTFE
440 x 315 x 220 mm
approx. 21 kg
50 VA;
Mains voltage according to the technical data shield
on the rear of the DMA 4100/4500/5000
Glass tube fuses 5 x 20 mm; DIN 41662;
230 V, T 800 mA
RS 232 interfaces for connecting a PC and printer
For connecting a keyboard
For more detailed information, see the reference
manual on the CD, Appendix B.
Appendix B: Technical Data
E N
33