Display And Keypad - Anton Paar DMA 4100 Manual De Instrucciones

4.3
After turning on the DMA, the instrument carries out a self-test and initialization
procedure and then the following display is shown.
Hint:
It may be necessary to adjust the contrast of the display using the "UP" and
"DOWN" keys (see Fig. 4 - 1). Save the contrast setting in the "instrument
settings" menu.
Fig. 4 - 3
A Headline
Pump
Density
-Osc-
B Measuring window (example)
Hint:
•
•
C Bottom line
The bottom line specifies the functions of the soft keys positioned on the keypad
below. The functions change depending on the menu displayed.
XDLIB28

Display and Keypad

A
B
C
The display of the DMA 5000 at the first start-up
"Pump" blinks if the air pump is switched on.
Name of selected method.
"-Osc-" in the right-hand corner indicates that the density cell
is not oscillating. No result (density or related value) will be
displayed or printed, the display and printout show "-----------".
The size and sequence of the displayed items can be changed in "Menu",
"method settings", "display configuration".
Density and density-dependent values are only shown after the
measuring temperature has been adjusted.
4 Instrument
Date and time
Density with automatic
viscosity correction
Specific gravity with automatic
viscosity correction
Measuring cell temperature,
state of the measurement
E N
11