Display Contrast; Setting Date And Time; Setting The Language; Defining A Method - Anton Paar DMA 4100 Manual De Instrucciones

E N
6 General Settings
16
- decrease or increase the numerical value of a digit by using the "UP" or
"DOWN" keys,
- select letters and numbers by using the "UP" or "DOWN" keys,
- conclude the setting by pressing "↵".
• To return to the previous display press the "Esc" soft key.
• To save changed data press the "Yes" soft key upon the question "Save
changes?".
• To return to the measuring mode press the "Exit" soft key.
6.2

Display Contrast

• Make sure that the instrument is set to the measuring mode.
• The display contrast is adjusted by pressing the "UP" or "DOWN" keys.
• Save the setting of the display contrast permanently in the "instrument
settings", "save display contrast" menu.
6.3

Setting Date and Time

Date and time are set in the "instrument settings", "date & time" menu. Different
formats can be selected.
6.4

Setting the Language

Select the language (English or German) in the menu "instrument settings",
"language".
6.5

Defining a Method

• A method consists of the following settings: measuring temperature, display
settings, printer and memory configuration, measurement settings and
control settings for the optional sample changer. These are all stored under a
unique method name. 10 different methods can be assigned.
• The 10 methods are factory preset, covering the most common measuring
tasks. However, every method can be individually changed, adapted or
renamed.
• To activate a method, press the "Method" soft key and select a method from
the list by pressing "↵".
• To rename the method select "method settings", "edit method name".
XDLIB28