NAME OF PARTS
Remote controller
1 START/STOP Button
2 SET TEMP. (Temperature) Button
3 MODE Button
4 FAN Button
5 ECONOMY Button
6 TIMER MODE (CLOCK ADJUST) Button
7 DAY (DAY OFF) Button
8 SET BACK Button
9 SET TIME ( < > ) Button
0 TIMER DELETE Button
A TIMER SET Button
B Vertical Airfl ow Direction and Swing Button
C Horizontal Airflow Direction and Swing
Button (This function cannot be used)
D MAINTENANCE (FILTER RESET) Button
En-3
WIRED TYPE
F
2
6
7
8
9
0
A
#1
1 Air Filter (In Air Intake Grille)
2 Airfl ow Direction Flaps
3 Air Intake Grille
4 Remote Controller (Wired)
5 Control Panel
6 Remote Control Signal Receiver
7 MANUAL AUTO Button
When the MANUAL AUTO button is
●
pressed in for more than 10 seconds, the
forced cooling operation will start.
●
The forced cooling operation is used
at the time of installation.
Only for authorized service personnel's use.
When the forced cooling operation starts
●
by any chance, press the START/STOP
button to stop the operation.
Please press the button at FILTER
●
INDICATOR RESET.
8 OPERATION Indicator Lamp (Green)
9 TIMER Indicator Lamp (Orange)
TIMER Indicator lamp lights when the
●
timer is set from wireless remote control.
0 ECONOMY Indicator Lamp (Green)
ECONOMY indicator lamp lights when
●
ECONOMY OPERATION and MINIMUM
HEAT OPERATION is operating.
I
H
G
J
K
E
1
3
4
C
B
5
D
E Operation Lamp
F Timer and Clock Display
G Operation Mode Display
H Fan Speed Display
I Operation Lock Display
J Temperature Display
K Function Display
Defrost Display
Thermo Sensor Display
ECONOMY Display
Vertical Swing Display
#1
Filter Display
#
1: Can be used if set correctly during installation.
Please consult authorized serviceman when
using this function.