Using The Memory Card - Festo CPX Serie Breve Descripción

3.5 Start behaviour of the CPX terminal
If the modify LED (M) continuously shines or flashes after
the system start, System start with parameterisation saved
and saved CPX expansion" is set or Force" is active.
Caution
For CPX terminals with a continuously shining or flash
ing M−LED, the parameterisation is not automatically
created by the higher−level system when the CPX ter
minal is replaced during servicing. In this case, verify
which settings are required before replacement, and
restore these settings after replacement.
You will find detailed instructions in the P.BE−CPX−
PNIO−....bus node description

3.6 Using the memory card

The memory card carries the configuration data, the name
of the fieldbus device, for example. This enables a bus
node to be replaced easily. For detailed information on its
use: see P.BE−CPX−PNIO−....
Caution
Switch off the power supply before removing or insert
ing the memory card (risk of operative malfunction or
damage).
Festo CPX−PNIO 0710NH English 29