Installation Instructions - Festo CPX Serie Breve Descripción

Normal operating status:
The PS and PL LEDs shine green, LED TP1 or TP2 shines or
flashes (if interface used); the red LEDs do not shine or blink.
3

Installation instructions

3.1 Assembly
The bus node is assembled in an interlinking block of the
CPX terminal.
1
Screws
Tightening torque
0.9 to 1.1 Nm
2
CPX bus node
3
Interlinking block
with contact rails
Festo CPX−PNIO 0710NH English
1
2
3
19