Moving Washer To A New Location; Reinstallation Of Shipping Materials - Alliance Laundry Systems H264I Instalación Y Operación

Moving Washer to a New Location . . .

To prevent damage while moving the washer, the
shipping materials MUST be reinstalled.
Reinstallation of Shipping
Materials
Remove front access panel by removing two screws.
Place the shock sleeves on all four shock absorbers. See
illustration.
Insert hooked end of shipping brace into the open slot of
the motor mount. Attach with bolts and washers. See
illustration.
Reinstall front access panel.
800138
HOOKED
END OF
SHIPPING
BRACE
BOLTS
Refer to Installing Your Washer section for proper
procedures whenever the washer is moved.
SHOCK SLEEVES
MOTO
MOUN
11