Dimensions And Specifications; Meter Case - Alliance Laundry Systems H264I Instalación Y Operación

Dimensions and Specifications . . .

17.5"
(44.8 cm)
14.9"
(37.9 cm)
The factory mounted coin meter case does not include the
service door lock, slide, coin drawer, coin drawer lock or
keys. These parts must be ordered (at extra cost)
according to the purchaser's requirements direct from the
manufacturer of your choice.
NOTE: You have the option of using a screw type lock
or a 1/4 turn lock on the meter case service door. If
you choose to use a screw lock, then the special
bracket (located inside the meter case) must be used.
DO NOT use the special bracket if a 1/4 turn lock is
used.
800138
28" (71.1 cm)

Meter Case . . .

2"
26.9" (68.3 cm)
(5.1 cm)
Coin Drawer Security — For additional security, drill
out the two pilot holes on each front side of the meter case
to 1/4 turn or 5/16 inch (6.4 or 7.9 mm) holes and install
a bicycle lock through these holes.
H286IE3A
5