Tabla de contenido
100
6.2 Preparation
When using a dosage monitor
1. Remove the short connecting tube (3 m)
from the nasal cannula
11
the connection of the bubble humidifier
.
26
2. Remove the long connecting tube (20 m)
from the oxygen connection
7
dosage monitor and from the oxygen out-
let
of the OXYMAT 3.
5
3. Unscrew the sterile water tank from the
dosage monitor. For further preparation
of the sterile water tank please observe
the relevant operating instructions.
When using a flowmeter
1. Remove the long connecting tube
m) from the connection
ter.
2. Release the union nut
and disconnect the flowmeter from the
oxygen outlet of the OXYMAT 3.
Removal of coarse dust filter
Please detach the coarse dust filter
service flap at the rear of the OXYMAT 3.
English
and from
12
of the
23
(10
17
of the flowme-
29
of the flowmeter
28
from the
13
Tabla de contenido
